DJI Comes out a newest drone.Call “Phantom 3 4K”,It only :$939.DHL EMS Free shipping,welcome to get more details on this link:
FPV Drone DJI phantom 2 with H3 3D Gimbal Quadcopter + DJI Lightbridge 2.4GHZ Transmitter Receiver +IOSD Mini+DJI Prop Protector
– 1x the whole set DJI phantom 2 with h3 3d 3 axis gimbal
– 1 x DJI lightbridge 2.4ghz transmitter and receiver
– 1 x DJI IOSD MINI
– 1 x FPV Cable
– 1 x DJI Pro Guard Protector
- Ready to Fly, Multifunctional Quad-rotor System
- Customized H3-2D and H3-3D Gimbal Support
- Precision Flight and Stable Hovering
- 25min Flight Time & Intelligent Battery
- Auto Return-to-Home & Landing
- Advanced Power Management
- Intelligent Orientation Control (IOC)
- Easy Battery Replacement
- Self-tightening Propeller
- Video Downlink Support
- CAN-Bus Expansion Module
PHANTOM 2 Weight (W Battery):1000g
Hover Accuracy (Ready To Fly):Vertical: 0.8m;Horizontal: 2.5m
Max Yaw Angular Velocity:200°/s
Max Tilt Angle:35°
Max Ascent / Descent Speed:6m/s
Max Flight Speed:15m/s(Not Recommended)
Operating Temperature:-10°C ~ 50°C
Supported Battery:DJI Intelligent Battery
DJI Intelligent Battery:
Charging Environment Range:0 to 40
Discharging Environment Range:-20 to 50
2.4GHz Remote Control:
Operating Frequency:2.4GHz ISM
Communication Distance (Open Area):1000m
Receiver Sensitivity (1%PER):-97dBm
Working Current/Voltage:100 mA@6V
Battery:4 AA Batteries
Precision Flight and Stable Hovering
Integrated GPS auto-pilot system offers position holding, altitude lock and stable hovering allows for added attention to filming.
25 Minute Flight Time & Intelligent Battery
High Capacity, high performance 5200mAh intelligent lithium polymer battery offers up to 25 minutes of flight time with battery capacity data, overcharge/discharge protection and maintenance reminders for greater reliability.
Auto Return-to-Home & Landing
If the Phantom 2 and its controller disconnect during flight for any reason, the Naza-M autopilot system’s failsafe protection will come to the rescue. Outputs of all command sticks on the control on the controller will go the center position and if the signal is good enough the Phantom 2 will return to home and land automatically. You can also program a One-Key-Go-Home function through the assistant software.
Intelligent Orientation Control (IOC)
In traditional Multirotor flight, forward is tied to the direction of the nose. Using IOC, it’s much simpler.In Course Lock mode, forward direction is always the direction the nose faced at takeoff, while in the Home Lock mode forward take the Phantom 2 back to where it took off from. Users can adjust these settings as they please.
Advanced Power Management
Power consumption has been improved by a custom power management system that monitors power capacity and voltage. Low power is indicated by the LED. If power drops below safe levels, the Phantom 2 will land automatically during low battery level.
Easy Battery Replacement
Integrated battery compartment allows for near instant battery changes. The slide and lock mechanism gives pilots the confidence that the battery is secure and ready for flight.
This innovative design allows users to install propellers almost worry free. These props can only be installed one way and also tighten during flight, enhancing safety. All propellers have been carefully and dynamically balanced to eliminate the jello effect.
Customized H3-3D Gimbal Support
A customized H3-3D gimbal, designed for easy assembly and connections is available for the Phantom 2. Its stability ensure high quality footage and the camera’s pitch can be controlled from the transmitter allowing pilots excellent media creativity. To get the H3-3D gimbal, just select that option and add to cart.
CAN-BUS Expansion Module for Function Expansion
Functions of the Phantom 2 can be expanded through its CAN-BUS module, which can be used for iOSD or 2.4G Bluetooth Datalink (Ground Station).
Easy Upgrade to FPV
AV output and video-downlink power cables are already installed and ready for upgrade. Please check with a UAVD specialist to learn more about video downlinks
DJI is announcing DJI Lightbridge, 2.4G Full HD Digital Video Downlink. DJI Lightbridge is an all new revolutionary2.4G Full HD digital video downlink. DJI Lightbridge offers extremely powerful equipment packed into a small and light-weight form factor. By offering 1920 x 1080p@30fps video data transmission from up to 1.7km (1.05miles) away, it’s the ideal solution for the professional aerial photographer and FPV users. Set yourself free and remove the limits from low definition analog video transmitters.
Features: 2.4G Full HD Digital Video Downlink
-1920×1080@60fps input and 1920×1080@30fps output Extreme Long Distance Transmission
-Less than100mWground unit transmission in full compliance with CE and FCC certification
-5dBi omni-directional antenna offers an enormous distance of up to1.7 km (1.05 miles)
-Optional 14dBipatchantenna boosts transmission distance tremendously to 5km (3.1 miles)
Multiple Input And Output Connections
-DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data)
-HDMI HD image output
-USB 2.0 image data output for iOS and Android phones and tablet synchronization
Built-in Remote Control Link
-Uplink remote control transmission and downlink video work simultaneously on2.4GHz.
-Remote control data travels to the uplink via the TX-Thru Port at the same time that video is streamed back down all without interference.
-Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control(6 Channels).
Control signals are received in the air and then transmitted to the flight controller through D-BUS.
-When used with a non-2.4G radio transmitter, video only transmission operation is supported.
The DJI 5.8G radio transmitter is recommended.
Strong Anti-Jamming Technology
-Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS) technology
is used for uplink transmission to enhance stability and offer anti-jamming capability.
-MIMO multi-antenna technology and OFDM modulation methods along with advanced algorithms are
utilized for downlink transmission to enhance data bandwidth, improving dynamic performance and increasing
stability even in harsh environments.
-Channel interference is constantly monitored during downlink transmission with automatic switching between 8 channels for the best possible signal.
-Up to 8 downlinks can be connected for parallel streaming and work independently without interference.
Low Latency Transmission
Maximum latency of up to 80ms
Built-in OSD(On-Screen Display)Function
-No additional equipment required for OSD functions when used with A2/WooKong-M/Naza-M V2
flight controllers. Flight parameters will be displayed onscreen.
-OSD functionality can be turned off via mobile software for HDMI and iOS/Android Output.
Must Work With DJI Multi-Rotor Flight Controllers
-DJI A2, WooKong-M and Naza-M V2 flight controllers
-Phantom 2, with DJI 5.8G radio transmitter.
Multi-device Operation Mode, Stable And Reliable
-A single air unit can transmit to multiple ground units sending video to multiple screens.
(Only one of the ground units can send a control signal while additional ground units will only be able to
receive a video signal)
-Encryption ensures only authorized devices can receive data which can be programmed via mobile device software.
Built-in High Capacity Battery
-Ground unit has a built in high capacity 4000mA battery offering up to 4.5hours of use per charge.
-Rechargeable through the supplied charger or via a3S~6S Li-Po power battery. A full charge takes
-LED battery level indicator -Also functions as a USB charger for mobile devices prolonging the life of
Electromagnetic Interference Shielded Structural Design
-Aluminum alloy casing -Extreme internal and external shielding for interference protection
DJI Phantom Drone Application Scenarios:
COOG TECH Thanks Customer Feedback: